LG Electronics 37LH265H, SAC34026004, 42LH255H, 42LH260H, 37LH250H Installer Menu Items 035 through

Installer Menu

Installer Menu Items 035 through 118

Menu Item	Function	Value Range		Default Value	Brief Description of Function and Comments
035	COMPPORT EN.	0 / 1		1	Set to 0 to disable HDMI 1. Set to 1 enable HDMI 1
038	YPrPb EN.	0 / 1		1	Set to 1 to enable display panel Component Video 1 input jacks.
039	REAR AUX EN	0	/ 1	1	Set to 1 to enable display panel Video 1 input jack.
040	AUTO CAMPORT	0 / 1		1	Set to 1 to automatically switch to Camport. If set to 1, STRT AUX SRCE cannot be set to 2.
046	STRT AUX SRCE	1 ~ 6, 255		6	Sets the starting AUX source.
047	AUX STATUS	0 / 1		0	Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
053	DIS. CH-TIME	0 / 1		0	Set to 1 to disable Channel-Time display.
069	EN. CH-T COL.	0 / 1		1	Set to 1 to enable custom color for the Channel-Time display.
070	FOR. CH-TIME	0 ~ 7		2	Chooses custom foreground color for the Channel-Time display.
071	BCK. CH-TIME	0 ~ 7		2	Chooses custom background color for the Channel-Time display.
073	CH NOT AVBLE	0	/ 1	0	If set to 1 and channel override is 0, “NOT AVAILABLE” message is displayed
					when directly accessing a channel not in the favorite channel list.
075	REVERT CH	0 / 1		0	If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
078	UPN MSB	0 ~ 255		0	User programmable number, most significant byte.
079	UPN MSB-1	0 ~ 255		0	User programmable number, most significant byte - 1.
080	UPN MSB-2	0 ~ 255		0	User programmable number, most significant byte - 2.
081	UPN LSB	0 ~ 255		0	User programmable number, least significant byte.
082	CHKSM ERROR	0 / 1		1	Enforces rigid M.P.I. checksum.
083	HANDSHK TIME	0 ~ 5		5	Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
084	PERMANENT BLK	0 / 1		0	Removes block hours setting for Parental Control and makes block permanent.
087	REAR RGB EN.	0 / 2 / 18		2	Set to 0 to disable RGB1. Set to 2 to enable for PC and Auto Configure always enabled. Set to 18 to
					enable for PC and Auto Configure one time only after AC ON.
088	EN NOISE MUTE	0 / 1		1	If set to 1, mutes audio if no signal is present.
090	KEY LOCK	0 / 1		0	If set to 1, keyboard is locked out, IR is still functional.
091	YPrPB2 EN	0 / 1		1	Set to 1 to enable HDMI-2 input.
093	RJP AVAILABLE	0 1 2 5 6		0	Set to 0 to disable. Set to 1, 2, 5 or 6 for HDMI or DVI mode. (See detailed descriptions.)
094	SAP MENU EN	0 / 1		1	Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
096	DEF. ASP. RATIO	0 ~ 4		2	Sets default aspect ratio at power up. See detailed descriptions and item 106.
099	BACK LIGHTING	1 ~ 100		200	Sets the brilliance of the TV picture backlighting.
		101 ~ 200, 255			Settings above 101 control dynamic back lighting and disable power saving mode..
102	ATSC BAND	0 ~ 4		4	Selects ATSC band.
103	ATSC TUNE MODE	0 / 1		1	Default 01 for physical channel scan. Set to 0 for Virtual Channel scan.
104	START MINOR CH	0 ~ 255		0	Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
106	ASP RATIO LOCK	0 / 1		0	To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
116	VIDEO MUTE EN	0 / 1		0	Set to 0 for normal, set to 1 for Blank.
117	FACT DEFAULT	0 / 1		0	0=Normal. 1=Loads presets of all above settings.
118	POWER SAVING	1, 3, 7		3	Set to 1 to be powered at b-Lan module. Set to 3 to bo powered at b-Lan module only when TV is powered
					n. Set to 7 to be not powered at b-Lan module.

(Except 32LH240H)

Note 1: Dependent on item 093 RJP Available setting.

206-4118 P A G E 2 7