LG Electronics TD-V14247E Part 4 Accessories Installation, Stacking Kit Installation Instructions

WARNING!

• Do not stack a washer on the top of the dryer.

• Incorrect installation can cause serious accidents.

Dryer

Washer

Insert the front rail. Push the front rail back to the stoppers of side stacking kit.

Attach both sides of the front kit with screws.

Part 4 ACCESSORIES INSTALLATION

Stacking Kit Installation Instructions

To ensure safe and secure installation, please observe the instructions below.

	Secure stacking kit side bracket to the
WARNING!	washer with a screw on the back of bracket.
	4 Repeat Steps 2, 3, 4 for the other side.
• The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more	Place the dryer on top of the washer by fitting
experienced service personnel.
	legs as shown in the picture. Avoid finger
• Incorrect installation can cause serious	5 injuries - be careful not to pinch fingers
accidents.	between the washer and dryer. Slide dryer
	slowly backwards to the stopper of kit.

Stacking kit

1

2

3

Place washer firmly on a stable, even and solid floor.

Peel protective paper off the tape from the stacking kit side bracket.

Fit the stacking kit side bracket firmly to the	6
side of top plate by attaching the double-
sided tape to top plate as picture shows.

7

Note

Clean the surface before attaching the brackets and double-sided tape.

1 6

•Do not use stacking kit with a gas dryer in potentially unstable conditions like a mobile home.