LG Electronics U8500 manual PIN code request Menu, Call barring Menu

	Settings
		PIN code request (Menu 7.7.2)
S ett
		You can activate a PIN (Personal Identification
i n g		Number). You can check the current status of
s		configuration from the status bar.
		PIN request and release procedures
		Item	Description
		Enable PIN Request	You have to input the PIN code each time
			the mobile phone is turned on.
		Disable PIN Request	You do not have to input the PIN code
			when the mobile phone is turned on.

1.Select ‘PIN Code Request’ item from the list, and press [Select]. Then a window allowing you to select ‘On’ or ‘Off’ appears.

-Select ‘On’/‘Off’ from the list, press [Select], and input the current PIN code to set the PIN request. If ‘PIN Code Request’ is already enabled/disabled, an “Already activated”/ “Already cancelled” message will be displayed.

2.3 incorrect PIN code entries in the PIN code input window would invalidate the PIN code. In this case, you have to input the PUK (PIN Unblock Key)

code to configure the PIN code again.

3.The maximum allowed number of attempts of PUK input is 10 times. ATTENTION: after having entered 10 times an incorrect PUK code, the SIM card will be blocked and must be replaced.

Press the C key in the PIN code input window to return to the previous step.

Note

]If the PIN code request cannot be disabled by operator settings, you will not be able to choose this menu item.

Call barring (Menu 7.7.3)

Call barring menus for All calls, Video, Voice are provided.

However, available menus are determined by the SIM supporting CPHS.

The menu consists of All calls, Video, Voice. The All calls menu provides menus to barring all calls and the Video menu provides menus to barring video calls. the Voice menu provides menus to barring voice calls.

88