Modem Control Parameters
Modem Reset: This is a user definable parameter that sends a reset string to the modem.
Dial Prefix: This parameter sets the dial prefix used for dialing out alarms.
Phone Number: This parameter sets the number to be dialed out for alarms.
Use This Number? NO: If "YES", the phone number above will be used for dialing out to deliver alarms. If "NO", the phone number on the workstation will be used for dialing out to deliver alarms. The phone number that is currently selected will appear on the status page.
If not connected, and with no alarms pending delivery, reset modem every 5:00 (mm:ss): This parameter sets how often the
If connected, but no activity has been detected for 20:00 (mm:ss), hang up and reset modem: This parameter sets the amount of time before the modem hangs up when there has been no data flow between the
After unsuccessful alarm delivery: This parameter sets how long the
Escape (+++) guard time: This parameter determines the time delay before and after the escape sequence to allow the modem to receive and acknowledge it.
Post hangup delay: This parameter determines how long the
Reset time (DTR Low): This parameter determines how long the
Post DTR high delay: This parameter determines how long the
Post reset string delay: This parameter determines how long the
Enable daylight saving time changeover from SiteGate-232
When set to "YES", the
Rev. | 18 | © |
