Operating Instructions
3.0OPERATING INSTRUCTIONS
3.1Controls and Indicators3.1.1Display Controls
The User Interface Module informs you of the status of the UPS and lets you configure the UPS to your own needs or preferences.
The module consists of a series of Status LEDs, an LCD display window (four lines of 20 characters each), and buttons for navigation, as displayed below.
| Status LEDs |
Fault/Warning LED | Standby Button |
LCD Display
Window
Alarm
Silence
Button
ESC
Navigation Buttons 
Buttons
Refer to the legend below to properly navigate the Nfinity User Interface.
Up
- Navigates cursor on display menus
Down
ESC Escape - Returns to previous display screen
Enter - Selects displayed information
Standby - Enables / disables output power
Alarm | - Mutes the audible alarm |
Silence |
Fault/Warning and Status LEDs
Refer to the legend below to indicate occurrence when an LED is lit.
Fault/Warning
Solid - A UPS fault condition has occurred. Flashing - A Warning has occurred. Consult event log.
AC Input - AC utility is available.
On Bypass - The Bypass is supplying the power.
Inverter On - The inverter is supplying the power.
On Battery - Battery is supplying power to the inverter.
AC Output - Power is available to supply the load.
17