Operating Instructions
3.5.7Module Replacement
The user interface also supplies instructions for removing and replacing modules. From the Main Menu, access the module replacement screen and select the type of module. Refer to the screens below:
Main Menu
UPS Status
UPS Configuration
Display Date/Time
Event Log
Active Alarms
Transfer to Bypass
>Module Replacement Service Tools
Module Replacement
Module Replacement
>Ctrl w/ Redundant Ctrl w/o Redundant Pwr w/ Redundant Pwr w/o Redundant Battery Module
Module Replacement menu options
Control Module w/ Redundant |
| Power Module w/ Redundant |
| Battery Module | ||||
Cntl Mod Replacement |
| Pwr Mod Replacement |
| Battery Module |
| |||
1. | Lift off display |
| 1. | Remove all |
| 1. | Remove all |
|
| panel and place |
|
| front bezels |
|
| front bezels |
|
| on top of UPS |
| 2. | Locate amber LED |
| 2. | Locate amber LED |
|
2. | Locate amber LED |
| 3. | Open lever |
| 3. | Loosen fastener |
|
3. | Open lever |
| 4. | Loosen fastener |
| 4. | Replace module |
|
4. | Loosen fastener |
| 5. | Replace module |
| 5. | Tighten fastener |
|
5. | Replace module |
| 6. | Tighten fastener |
| 6. | Replace all bezels |
|
6. | Tighten fastener |
| 7. | Close lever |
|
|
|
|
|
|
|
|
| ||||
7. | Close lever |
| 8. | Replace all bezels |
|
|
|
|
8. | Replace display |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Control Module w/o Redundant
Cntl Mod Replacement
1.Remove bottom bezel and place UPS in bypass
2.Lift off display panel and place on top of UPS
3.Locate amber LED
4.Open lever
5.Loosen fastener
6.Replace module
7.Tighten fastener
8.Close lever
9.Wait for amber LED to stop flashing.
10.Replace display 11.Switch bypass to return to UPS
operation 12.Replace bezel
Power Module w/o Redundant
Pwr Mod Replacement
1.Remove bottom bezel and place UPS in bypass
2.Remove remaining front bezels
3.Locate amber LED
4.Open lever
5.Loosen fastener
6.Replace module
7.Tighten fastener
8.Close lever
9.Wait for amber LED to stop flashing.
10.Switch bypass to
return to UPS operation
11.Replace all bezels
For more details on module replacement, consult 4.0 - Troubleshooting.
29