Putting into operation
Fig. 6
Make sure the following tools are on hand: q Cordless screwdriver Torx®15, 20, 25 q Spanner 13, Spirit level
The intermediate base and side wall of the kitchen unit have to be at right angles to one another. Align the kitchen unit using a spirit level and angle. If necessary, use shims.
The appliance can also be installed in an ordinary kitchen cabi- net. In this case detach the fittings of the unit door and recess.
They are no longer needed as the unit door is fitted to the appli- Fig. 7 ance door.
Note
u Before assembling the door of the unit, make sure that the admissable weight of the unit door is not exceeded.
u Otherwise damage to the hinges and resultant malfunction cannot be ruled out.
Refrigerator compartment door
Freezer compartment door
Check installation dimensions:
Max. weight of unit door
20kg
12kg
| A | B | C | |||
ICB 31 | 1772 mm - 1788 mm |
| 1770 mm |
| 549 mm |
|
|
|
|
|
|
|
|
ICBN 30, | 1772 mm - 1788 mm | 1770 mm | 695 mm | |||
SICBN |
|
|
|
|
|
|
30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
6
