Liebherr 7085638-01 Maintenance, Malfunction, Defrosting, Cleaning the appliance

Models: 7085638-01

1 12
Download 12 pages 23.67 Kb
Page 10
Image 10
Maintenance

Maintenance

6 Maintenance

6.1Defrosting

6.1.1Defrosting refrigerator compartment

The refrigerator compartment is defrosted automatically. The water evaporates. Drops of water on the rear wall are function- ally conditioned and perfectly normal.

u Clean the drain hole at regular intervals to allow the defrost water to drain (see 6.2) .

6.2 Cleaning the appliance

WARNING

Risk of injury and damage as a result of hot steam!

Hot steam can lead to burns and can damage the surfaces. u Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

u Do not use cleaning agents in concentrated form.

u Do not use any scouring or abrasive sponges or steel wool. u Please do not use any aggressive, scouring, sand-,

chloride-, chemical- or acid-based cleaning agents. u Do not use chemical solvents.

u Do not damage or remove the type plate on the inside of the appliance. It is important for the customer service.

u Do not pull off, bend or damage cables or other compo- nents.

u Do not allow any cleaning water to enter the drain channel, ventilation grille or electrical parts.

u Please use soft cleaning cloths and a universal pH-neutral cleaning agent.

u Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior.

u Empty appliance.

u Pull out the power plug.

u Clean plastic outer and inner surfaces with lukewarm water and a little washing-up liquid.

Do not apply stainless steel cleaning agent to glass or plastic surfaces to prevent them from being scratched. Darker areas at the beginning and quite an intensive colour of the stainless steel surface are normal.*

NOTICE*

The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompa- nying care product.

Otherwise the surface coating will be affected.

u Wipe the coated door surfaces using a soft, clean cloth only. In case of stubborn dirt, use a little water or a neutral cleaning agent. A microfibre cloth can be optionally used.

u If the stainless steel side walls are dirty, clean them using a commercially available stainless steel cleaning agent. Then evenly apply the accompanying stainless steel care product, making strokes in the direction of the grain.

u Wipe side walls with a paint finish using a soft, clean cloth only. In case of stubborn dirt, use a little water or a neutral cleaning agent. A microfibre cloth can be optionally used.

u Clean drain hole: Remove deposits with a narrow instrument, e.g. a cotton bud.

u Clean items of equipment by hand with lukewarm water and a little washing-up liquid.

u Only use a damp cloth to clean the telescopic rails. The grease in the runners is for lubrication purposes and must not be removed.

After cleaning:

u Wipe dry the appliance and items of equipment. u Connect the appliance and switch it on again. u Put the food back inside.

6.3 Customer service

First check whether you can correct the fault yourself by refer- ence to the list (see Malfunction). If this is not the case, please contact the customer service whose address is given in the enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

u Have any repairs and action - not expressly specified - on the appliance and mains cable carried out by service personnel only. (see Maintenance)

u Read the appliance designation

Fig. 13 (1), service No. Fig. 13 (2) and serial No. Fig. 13 (3) off the type plate located inside the appliance on the left- hand side.

Fig. 13 u Notify the customer service, specifying the fault, appliance designation Fig. 13 (1), service No. Fig. 13 (2) and serial No.

Fig. 13 (3).

w This will help us to provide you with a faster and more accu- rate service.

u Keep the appliance closed until the customer service arrives.

w The food will stay cool longer.

u Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.

7 Malfunction

Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself:

Appliance does not work.

The appliance is not switched on.

u

Switch on the appliance.

The power plug is not properly inserted in the wall socket.

u

Check power plug.

The fuse of the wall socket is not in order.

uCheck fuse.

10

* Depending on model and options

Page 10
Image 10
Liebherr 7085638-01 operating instructions Maintenance, Malfunction, Defrosting, Cleaning the appliance, Customer service