Liebherr liebherr manual Fig. G

8.Dismantle the lower attachment bracket from the refrigerator door. Align the bracket to the lines on the refrigerator door panel. (fig. G).

Fasten the bracket with any hole wherever possible using a minimum of 6 screws 4 x 16 mm.

13.Fasten the refrigerator panel using the same screws that held the lower bracket before removal (fig. K).

fig. G

9.Open the refrigerator door and suspend the refrigerator panel on the top adjusting pins (fig. H).

10.Screw securing nuts onto the adjusting pins and slightly tighten (fig. H).

fig. K

14.Extend the soft-stop cylinder and connect with the ball stud (fig. L).

fig. L

fig. H

11.Move the panel to the left until it makes contact with the center rail (fig. I).

12.Tighten the hex nuts finally.

fig. I

15.Attach the retaining clamp to the ball housing of the soft-stop cylinder (fig. M).

fig. M

20