BEFORE USE (continued)
Loading the Battery
Install the AA batteries into the remote control
transmitter. |
|
| |
1. | Remove the battery cover. |
|
|
| Push the knob while lifting up the battery cover. |
|
|
2. | Load the batteries. |
|
|
| Make sure the plus and minus poles are correctly | 1 | 2 |
| oriented. | ||
3. | Close the battery cover. |
|
|
CAUTION
•Use only the specified batteries with this remote control transmitter. Also, do not mix new and old batteries. This could cause in battery cracking or leakage, which could result in fire or personal injury.
• When loading the batteries, make sure the plus and minus terminals are correctly oriented as indicated in the remote control transmitter. Incorrect orientation could cause battery cracking or leakage, which could result in personal injury or pollution of the surrounding environment.
•When you dispose the battery, you obey the law in the relative area or country.
•Keep the battery away from children and pets.
•When not to be used for an extended period, remove the batteries from the remote control transmitter.
NOTE: Replace the batteries when remote control transmitter operation becomes difficult.
ENGLISH
Fixing the Handle
Fix the enclosed handle if you need.
1.Raise up the handle hook, and pass one end of the handle through the hole of handle hook.
2.Buckle the end of the handle, as the right drawing.
3.Fix the other end of the handle to the other handle hook in the same way.
1
2
CAUTION
Make sure the handle is fixed before carrying the projector with the handle. If the projector should be dropped from the handle should be off, it could result in an injury, and continued use could result in fire or electrical shock. Do not flourish the projector with the handle.
