90T SETTINGS
Use the TIME/WEIGHTUP ARROW key to move forward through settings. Use the TIME/WEIGHT
DOWN ARROW key to move backward through these settings. To change a setting, use the SPEED
ARROW key. If display mode is turned off, each setting is identified as a numeral only.
SETTING FACTORY DEFAULT DESCRIPTION
DISPLAYMODE “diSPON” (1)* This setting turns the console’s ability to display messages
on and off while in the Settings mode.
ENGLISH/METRIC UNITS “UnitS LbS” (2) The measurement unit type for weight, distance, and speed.
“LbS” represents the ENGLISH system, and “grS” represents
the Metric system.
MAXIMUM WORKOUTTIME “tinE 99” (3) This is the maximum allowable duration for a workout.
The range is one to 99 minutes.
MAXIMUM SPEED “SPd 10.0” (4) This is the fastest speed at which the treadmill can run.
The range is 0.5 MPH to 10 MPH (0.8 KPH to 16 KPH).
MAXIMUM INCLINE “inc. 15.0” (5) This is the maximum percentage to which the incline can be set.
The range0.0 percent to 15 percent.
FLYERS ON/OFF “Fly ON” (6) Flyers are the animated circles that appear in the DATA
DISPLAYwhen the treadmill is turned on.
POLAR ON/OFF “PoLAR ON” (7) Switching on this feature makes it possible to use the
Polar heart rate chest strap.
ACCELERATION RATE “AccEL= 3” (8) The rate at which the treadmill speeds up to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
DECELERATION RATE “dEcEL= 3” (9) The rate at which the treadmill speeds up to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
WAXER SYSTEM INSTALLED “Lub SyS = no” (10) This setting indicates whether or not a waxer system
has been installed on the treadmill. This setting is changed
when the wax bag is replaced on units with the factory-installed
waxer option. See the topic titled Removing and Replacing the
Wax Bagin Section 1.2 for more information.
*If display mode is turned off each setting is identified as a numeral only.