Life Fitness 90T, 91Ti operation manual Tracking Centering a Striding Belt

TRACKING (CENTERING) A STRIDING BELT

Two people are needed to perform this procedure.

1Locate the two access holes to the belt tensioning bolts on each of the rear roller guards.

2Stand on the sides of the treadmill and straddle the belt, not standing on it. Start a MANUAL workout, and set the belt speed to run at 4.0 mph (6,4 kph).

3If the striding belt has moved to the right, turn the right tension bolt (B) 1/4 turn clockwise with provided ¼" Allen wrench, and then turn the left tension bolt (A) 1/4 turn counter-clock- wise to start striding belt tracking back to center of roller.

If the striding belt has moved to the left, turn the left tension bolt 1/4 turn clockwise and then turn the right tension bolt 1/4 turn counter-clockwise to start striding belt tracking back to center of roller. Repeat adjustments until striding belt appears centered. Allow machine to continue running for several minutes to observe if tracking remains stabilized.

NOTE: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Customer Support Services. The phone num- bers are listed in "How to Obtain Product Service."

NOTE: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Customer Support Services. The phone numbers are listed in Section 6.7, titled How to Obtain Product Service.

A B

35