Life Fitness 91Ti, 90T operation manual Fitness Networking and Entertainment 91TI only

FITNESS NETWORKING AND ENTERTAINMENT (91TI ONLY)

A network port on the console of the Life Fitness treadmill allows the unit to be connected to a fitness entertainment system and/or a network, such as the FitLinxxTM interactive fitness network.

•Fitness network: The network connection enables the console to upload user workout statistics to a fitness network database or to download remotely stored information, such a pre-set workout program. See Section 4.2, titled Using the Workouts, for information on logging onto a network.

•Entertainment: The network connection enables the console to power a third-party receiver for use with a service such as the Cardio Theater® entertainment system or the BroadcastVisionTM entertainment system.

This port is located inside the console assembly. To access it, remove the left accessory tray. See Section 6.5 for details. Then, remove the console assembly cover door. Locate the port and plug in the network cable. Re-attach the console assembly cover door and the accessory tray. Any use of the port for other than its intended purpose could void the product warranty.

A

POWER CORD ROUTING

The power cord run is attached to the treadmill motor pan. On units sold in the United States, the cord runs out from the front panel of the motor pan on the right side.

On units sold elsewhere, the cord plugs into the bottom of the motor pan near the front, user left corner. It is held in place by a clip.

Always run the power cord in front of the treadmill to plug it in. Do not run the power cord under- neath, or along the side, of the unit.

14