5 OPTIONAL SETTINGS
5.1ENTERING AND USING THE OPTIONAL SETTINGS FEATURE
Fitness club managers and other authorized personnel can use the Optional Settings feature to change default settings, or to enable or disable certain programs or displays on the console.
To enter the Optional Settings, while the unit is on, hold down the UP ARROW key, and press CLEAR twice. The MESSAGE CENTER displays a program version number. Press the ENTER key. The MESSAGE CENTER displays “OPTIONAL SETTINGS”. Scroll forward through the options using the ENTER key, or backward, using the CLEAR key. For each feature or setting option, the MESSAGE CENTER displays the default setting. To change the default, press the UP or DOWN ARROW key for the desired value. Press ENTER to select the new value or setting and proceed to the next setting.
To exit Optional Settings, press the CLEAR key repeatedly until the MESSAGE CENTER displays “SELECT WORKOUT OR PRESS QUICK START”. Or, after the last setting has been displayed and it is impossible to scroll forward by pressing ENTER, hold down the QUICK START key, and press CLEAR. The MESSAGE CENTER then displays the prompt to select a workout.
| OPTIONAL SETTINGS | |
Setting | Default Value | Description |
MAX WORKOUT | 60 minutes | This is the maximum possible duration for a |
DURATION |
| workout. The value can range from 10 to 99. |
ENGLISH/METRIC | ENGLISH* | This option determines the units of weight |
UNITS | METRIC** | measurement used by workouts. |
WATTS DISPLAY | DISABLED* | If this option is enabled, the MESSAGE CENTER |
ENABLE/ | ENABLED** | displays the Watts equivalent of the step rate. |
DISABLE |
|
|
(93Si only) |
|
|
METS DISPLAY | DISABLED* | If this option is enabled, the MESSAGE CENTER |
ENABLE/ | DISABLED** | displays the Mets equivalent of the step rate. |
DISABLE |
|
|
(93Si only) |
|
|
CAL/HR DISPLAY | ENABLED* | If this option is enabled, the MESSAGE CENTER |
ENABLE/ | DISABLED** | displays the number of calories burned per hour |
DISABLE |
| during the workout. |
WATTS PROGRAM | DISABLED* | If this option is enabled, the Watts workout becomes |
ENABLE/ | ENABLED** | an available workout on the stairclimber. |
DISABLE |
|
|
(93Si only) |
|
|
METS PROGRAM | DISABLED* | If this option is enabled, the Mets workout becomes |
ENABLE/ | ENABLED** | an available workout on the stairclimber. |
DISABLE |
|
|
(93Si only) |
|
|
USER LANGUAGE SELECT | DISABLED | This option, if enabled, gives users the ability to select |
|
| a language for use during a workout. See the topic |
|
| entitled User Language Select, in this section. |
*Applies to units programmed to perform measurements in English system. **Applies to units programmed to perform measurements in Metric system.
29
