Step 2: Apply blood sample
With the Test Strip in the Meter and
apply sample
on the display, apply a drop of blood to the Test Spot.
sample 
The Meter will beep when the blood has been applied to the Test Spot.
Make sure that you:
■Do not remove the Test Strip from the Meter to apply blood.
■Do not smear blood on the Test Spot or apply a second drop after the test begins.
■Do not move the Test Strip when you are applying blood. If the Test Strip moves, push it back to its original position.
■Touch only the tip of the drop of blood to the Test Spot.
■Apply enough blood to form a round, shiny drop that covers the Test Spot completely and stays wet during the entire test.
33
