MESSAGE | PROBLEM | WHAT TO DO |
114 (example)
[No “mm” before the result and no decimal point]
The language and unit of measurement have been changed to “P 1” English (mg/dL) either accidentally or through an electronic malfunction.
See Setting the Meter, page 7,
to reset the language and unit of measurement to “P 3” English (mmol/L).
battry
clean test area
The battery is too low. The | Replace the battery. |
Meter will not operate. |
|
1) There is dirt, blood, or lint | Clean the Test Area |
on the Test Area. | and Test Strip Holder |
| according to instructions. |
2) Your hand or an object | Repeat the test. Keep |
covered the Test Area while | Test Area clear. |
the Meter was turned on. |
|
44
