Welcome
Congratulations on your purchase of the Titan D100 digital SLR housing.
Please inspect the packaging of your product to verify that there was no damage during shipping.
If you are not familiar with your camera’s features, please take time to become familiar with the camera before you proceed in this manual. This manual assumes you have a working knowledge of your camera and will only cover operational procedures relative to the underwater housing.
Periodically refer to the website for instruction revisions.
http://www.uwimaging.com
Caution - Caution - Caution - Caution - Caution
We hope you have a wonderful underwater experience with Light & Motion equipment. To increase your enjoyment and the life span of your new gear please take an extra minute to review these general recommendations.
•Check the operation of all your equipment several weeks prior to your trip. If mainte- nance or repair is necessary, then time is available for both shipping and repair schedul- ing.
•Never transport or ship the housing with the camera inside.This may damage your cam- era.
•Never leave your housing in the rinse bucket, it may be damaged by other equipment.
•When removing the camera from the housing after a dive, do so in a dry controlled envi- ronment away from other SCUBA related equipment. This prevents water from other equipment or water from another diver accidentally entering the housing.
•If a product is flooded, immediately rinse it with fresh water. Most parts will be salvage- able if not corroded by salt water.
Table of Contents
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Camera Preparation | 6 |
Installing Battery Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the D100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Titan D100 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Attaching Strobes | 14 |
Installing Bulkheads | 14 |
Attaching Sync Cables to Titan | 14 |
15 | |
ROC and Focus Controls | 15 |
Changing D100 Lenses | 20 |
Attaching Light & Motion Lens Gears | 20 |
Attaching and Removing Ports and Conversion Rings | 20 |
Installing optional Mod Lights | 22 |
Replacing ROC Handle Batteries | 22 |
Replacing Handle Thread Rings | 24 |
Moisture Alarm | 24s |
After Diving Care | 25 |
25 | |
Titan D100 Accessories | .26 |
Returning Products for Care | . 27 |
Contact Light & Motion | . 27 |
