Light & Motion TITAN D100 manual Titan D100 Controls, Top Controls, Rear Plate Controls

(Fig. 9)

(Fig. 11)

(Fig. 13)

(Fig. 10)

(Fig. 12)

(Fig. 14)

Titan D100 Controls

Top Controls

Mode Dial (Fig 17):Accesses the camera’s Mode Dial.

Use the Mode Dial to select camera’s exposure mode.

Use the Mode Dial to select the following settings:

ISO - White Balance - Image Size - Image Quality - AF Area Mode

On Dial (Fig. 18):Turns the camera on.

To turn the camera on, turn the On Dial counter-clockwise until it stops. Then press the On Dial down and turn clockwise.

Note:The camera can’t be turn off while in the housing.

Back Light button (Fig 18): Illuminates the LCD data screen.

The Back Light button is also used in combination with the Format Button (located on the Rear Plate) to format the media card when the camera is in the housing.

Exposure Compensation (Fig 18):Accesses camera’s exposure compenstation features.

Rear Plate Controls

Metering Selector Lever (Fig. 19): Selects camera metering method.

Arrow Buttons (Fig. 20): Selects area focus, menu and navigates images during playback.

Trash Can button (Fig. 21): Deletes images during playback.

BKT button (Fig. 22):Access camera’s bracketing features.

Format (Fig. 22): Use with Back Light button to format media card.

Monitor button (Fig. 23): Switches camera to playback mode.

Menu button (Fig. 23):Activates camera’s menu.

Thumbnail button (Fig. 24): Changes playback image size.

Enter Button (Fig. 24): Confirms menu selections.

Left Side Controls

Focus / Zoom Dial: Engages the lens manual focus or zoom ring (Fig 25).

Focus / Zoom Neutral Lock: Disengages focus gear when using auto focus (Fig 26).

(Fig. 15) (Fig.16)