![INSTRUCTIONS FOR INSTALLATION OF](/images/new-backgrounds/40221/402213x1.webp)
WITWCTION SHEET NO.
INSTRUCTIONS FOR INSTALLATION OF
S:40714 TRADITIONAL STYLE RADIANCE PENDANTS CONTINUED
!92 Page 2 of 2
JPPORT STEM Attachment AND ADJUSTMEN~
1.Loosen LOWER NUT on end of SUPPORT STEM until it is nearly to the end.
2.Hook opposite end at SUPPORT STEM onto the SUPPORT HOOK on CENTER STEM ASSEMBLY and allow SUPPORT STEM to swing down so the STEM rest in the SLOT in the SUPPORT BRACKET (Fig. 3A).
3.Tighten LOWER NUT against the SUPPORT BRACKET until SUPPORT STEM draws tight on SUPPORT HOOK (Fig. 3B).
4, Secure in place by tightening UPPER NUT against SUPPORT BRACKET (Fig. 3C). 5. Repeat for remaining SUPPORT STEMS.
IFFUSER CLEANING AND REMOVAL
CAUTION Turn power oft to fixture before attempting to clean.
Diffuser can be cleaned from above the fixture by removing lamps and cleaning DIFFUSER with a soft damp cloth, Should DIFFUSER need to be removed for cleaning, follow steps below,
1, Remove lamps ~om fixture,’
2, From below fixture, pushup on one side of the DIFFUSER and allowthe oppositeside to dropdownpassed HOLDER KNOB (Fig. 1)
3.Stide DIFFUSER out on an angle from LOWER FIXTURE ASSEMBLY
NOTE DIFFUSER may have to be gentlycompressedon either side to pass fhmugh opening in LOWER FIXTURE ASSEMBLY.
I “Jk
| |
FIG.2 | SUPPORT |
SUPPORTSTEM | eRACKET |
/
UPPERNUT
)WER
NUT
SLOT |
| ( | ( | ( |
SUPPORTaRACKET | @ | LOWER |
|
|
NUT |
| UPPER | ||
|
|
| ||
SUPPORTARM ~ |
| SUPPORTBRACKET |
| NUT |
|
|
|
|