Lightwave Communications 2X16 user manual Installation, Unpacking the Items

Lightwave Communications PC ServerSwitch 2x16

5.0 Installation

The PC ServerSwitch 2x16 unit is designed to occupy 3.50 inches of rack space. Sufficient space is required behind the rear panel of the unit to allow for attached cables bend radius (6 inches should be sufficient). It is helpful to plan ahead if additional units might be added to the configuration at some later date. If cascading (adding PC ServerSwitch 2x16’s) is to be used, make certain to leave enough space in the rack for additional units. The PC ServerSwitch 2x16 installation can be expanded at any time, without interfering with servers connected to existing switches.

Figure 5: PC ServerSwitch 2x16 – Front and Rear panels

STEP 1 -- Unpacking the Items

Verify that the following items are located in the packaging.

•(1) PC ServerSwitch 2x16

•(1) AC Power Cordset

•(1) Cable - DB9 Female to Male Serial data cable (6 foot long)

•(1) PC ServerSwitch 2x16 Product Handbook

•Cables, as required for your number of servers and units.

NOTE! Optional cable kits are available. (1) Kit contains:

•(2) male-male 6-pin MiniDIN cables, to connect a server's keyboard and mouse to PC ServerSwitch 2x16

•(1) HD15 male-male video cable to connect server video adapter to the PC ServerSwitch 2x16

NOTE! Other items may be ordered or shipped separately.

www.lightwavecom.com Page 17 of 24