Linak MJB user manual IP Protection degree, Following disinfectants/detergents are recommended

IP Protection degree:

All LINAK products can be cleaned as follow according to their IP protection, which is stated on the product label.

The IP code specifies the degrees of protection provided by the enclosures. Only the protection against ingress of water (second characteristic numeral) is specified, ingress of solid foreign objects (first characteristic numeral) is not specified and therefore replaced by the letter X in the code.

IP Protection	Cleaning instrucions
IPX0	Clean with a damp cloth
IPX1	Clean with a damp cloth
IPX2	Clean with a damp cloth
IPX3	Clean with a damp cloth
IPX4	Clean with a damp cloth
IPX5	Wash with a brush and water, but not water under pressure
IPX6	X Wash with a brush and water. The water can be under pressure, but the system
	must not be hosed down directly with a high-pressure cleaner. Max. 20oC
IPX6 Washable	Clean by the use of water tunnels

The materials are resistant to the majority of cleaners and disinfectants used in the hospital and nursing home sector.

Cleaning with a steam cleaner, for example, is not permitted, as it will not be possible to maintain a minimum distance of 300 mm from the electrical parts.

The following directions regarding cleaners and disinfectants must be complied with:

•They must not be highly alkaline or acidic (pH value 6-8).

•They must not contain caustic agents.

•Their contents must not be able to change the structure of the surface or adhesion of the plastic.

•They must not break down grease.

The following disinfectants/detergents are recommended:

•Neodischer Dekonta, dosage 1-3%, made by CHEMISCHE FABRIK Dr. WEIGERT,

•CCOTRADE RW, dosage 0.5%, made by CCOTRADE GmbH.

15