FINGER ASSEMBLY REMOVAL (CONT’D)
2.Grasp top finger housing, lift up from bracket and pull forward.
3.Grasp bottom finger housing handle and pull forward, sliding assembly out of oven.
BOTTOM FINGER ASSMBLY
4.Slide finger cover from housing. Lift out inner Columnating Plate.
TOP FINGER ASSMBLY
5.Reassemble in reverse order. Be sure finger assembly seats securely over rear openings.
HOW TO OBTAIN SERVICE
If the oven fails to operate, check the circuit breaker to be sure it is turned on (on a gas oven check the manual gas valve to insure it is in the “ON” position). In addition, check the fuses on the back of the oven to be sure that they are good before you call the Authorized Service Agency. The name and phone number of the Authorized Service Agency should be located on the oven or contact the factory for the name of the nearest Authorized Service Agency.
Impinger II – Digital Advantage Ops Manual | 17 |
