MAINTENANCE |
ENGINE SERVICE
EVERY DAY OR EVERY 8 HOURS |
|
| |||
FIRST SERVICE (50 HOURS) |
|
| |||
| EVERY 100 HOURS OR 3 MONTHS |
| |||
| EVERY 150 HOURS OR 4 MONTHS |
| |||
| EVERY 30O HOURS OR 9 MONTHS |
| |||
|
| EVERY 400 HOURS OR 12 MONTHS |
| ||
|
| EVERY 500 HOURS OR 15 MONTHS |
| ||
|
| EVERY 600 HOURS OR 18 MONTHS |
| ||
|
|
| ENGINE SERVICE (NOTE 2) |
| |
|
|
|
| MAINTENANCE ITEM | TYPE OR QUANTITY |
I |
| I | Coolant level | 50/50 Water/Ethylene Glycol | |
|
| Concentration of antifreeze | |||
I |
| R | Coolant (NOTE 3) | 9.5 qrts., 9.0L | |
R |
| Engine oil level (NOTE 1) | 8.0 qrts., 7.6L (including filter) | ||
R |
| Engine oil (NOTE 1 & 3) | |||
R | R |
| Engine oil filter |
| |
| C | R | Drain water separator & fuel strainer |
| |
| I | Fuel filter canister |
| ||
|
| Tension of alternator drive belt |
| ||
| I | R | Alternator drive belt wear | Kubota # | |
| C | Alternator drive belt | |||
| R | Air filter (earlier check may be req'd) | Donaldson # P821575 | ||
|
| Air filter element | |||
|
| I | Valve clearances | ||
|
| I | Electrical systems |
| |
I |
| I | All nuts and bolts for tightness |
| |
I |
| Leaks or engine damage |
| ||
|
| Battery |
| ||
| I = Inspect | C = Clean | R = Replace |
| |
Notes:
(1) Consult Engine Operators Manual for oil recommendations.
(2) Consult Engine Operators Manual for additional maintenance schedule information.
(3) Fill slowly! Ensure correct quantity is used.
Above operations to be carried out by trained personnel with reference to the workshop manual where necessary. |
|
These preventive maintenance periods apply to average conditions of operation. |
|
If necessary use shorter periods. | S25833 |
PIPELINER® 200D KUBOTA
