MAINTENANCE |
GUN HANDLE DISASSEMBLY
The internal parts of the gun handle may be inspected or serviced if necessary.
The gun handle consists of two halves that are held together with a collar on each end. To open up the handle, turn the collars approxi- mately 60 degrees counterclockwise (the same direction as removing a right hand thread) until the collar reaches a stop. Then pull the collar off the gun handle. If the collars are difficult to turn, position the gun handle against a corner, place a screwdriver against the tab on the col- lar and give the screwdriver a sharp blow to turn the collar past an internal locking rib.
Counterclockwise
TABLE D.2
ACCESSORIES AND EXPENDABLE REPLACEMENT PARTS
FOR MAGNUM 250L GUN AND CABLE ASSEMBLIES
Description | Part No. |
| English | Metric |
| Size | Size | ||
CABLE LINER |
|
|
|
|
For 15' (4.5 m) or |
| .025 | 0.6 – 0.8 mm | |
shorter Cable |
| .035 | 0.9 – 1.2 mm | |
|
| 3/64" | 1.2 mm | |
|
|
| (Alum. wire) | (Alum. wire) |
|
|
|
|
|
CONTACT TIPS |
|
|
|
|
Standard Duty | .025" | 0.6 mm | ||
| .030" | 0.8 mm | ||
| .035" | 0.9 mm | ||
| .045" | 1.2 mm | ||
Heavy Duty | .035" | 0.9 mm | ||
| .045" | 1.2 mm | ||
Tapered | .025" | 0.6 mm | ||
| .030" | 0.8 mm | ||
| .035" | 0.9 mm | ||
| .045" | 1.2 mm | ||
Tab (For Aluminum) | 3/64" | 1.2 mm | ||
|
|
| (Alum. Wire) | (Alum. Wire) |
|
|
|
|
|
GAS NOZZLES |
|
|
|
|
Fixed (Flush) |
| 3/8" | 9.5 mm | |
| * | 1/2" | 12.7 mm | |
|
| 5/8" | 15.9 mm | |
Fixed (Recessed) |
| 3/8" | 9.5 mm | |
|
| 1/2" | 12.7 mm | |
Requires: Gas |
| 5/8" | 15.9 mm | |
|
|
|
| |
Diffuser As'bly | * | .025 | 0.6 – 1.2 mm | |
Adjustable |
| 1/2" | 12.7 mm | |
Requires: |
| 5/8" | 15.9 mm | |
|
|
|
| |
Nozzle Insulator |
|
|
| |
As!bly |
|
|
|
|
Requires: |
|
|
|
|
Gas Diffuser |
| .025 | 0.6 – 0.8 mm | |
As!bly |
| .035 | 0.9 – 1.2 mm | |
Gasless Nozzle | ∆ |
|
| |
(For Innershield) |
|
|
|
|
|
|
|
|
|
GUN TUBE ASSEMBLIES |
|
|
|
|
Standard (60°) | * |
|
| |
45° |
|
|
| |
|
|
|
|
|
*Included with POWER MIG 215
∆ Requires
POWER MIG 215
