Lincoln Electric 215 manual Installation, Technical Specifications Power MIG

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS – POWER MIG 215

INPUT – SINGLE PHASE ONLY

Standard Voltage/Phase/Frequency

208/230/1/50/60 Hz

Duty Cycle 30% 40% 60%

Welding Current Range

30 – 250Amps

Input Current @ 170 Amp Rated Output (With 115V receptacle loaded to 15A)

39/35 Amps

RATED OUTPUT

Amps

215Amps

190Amps

170Amps

OUTPUT

Maximum Open Circuit Voltage

35 Volts

Input Current @ 215 Amp Rated Output (With 115V receptacle loaded to 15A)

45/41 Amps

Volts at Rated Amperes

22Volts

23Volts

24Volts

Welding Voltage Range

13.5-24 Volts

RECOMMENDED INPUT WIRE AND FUSE SIZES

		Input Ampere			75°C Copper Wire		75°C Copper Wire
Input Voltage/	Fuse or Breaker				in Conduit		in Conduit
			Rating On		AWG (IEC) Sizes		AWG (IEC) Sizes
Frequency (Hz)	Size (Super Lag)		Nameplate		(For lengths		(For lengths
					up to 100 ft.)		exceeding 100 ft.)
208/50/60	60		45A		10 (6 mm2)		8 (10 mm2)
230/50/60	60		41A		10 (6 mm2)		8 (10 mm2)
	NOTE: Use #10 AWG Grounding Wire
	WIRE SPEED RANGE
Wire Speed			50 – 700 IPM (1.27 – 17.8 m/minute)
	PHYSICAL DIMENSIONS
Height	Width			Depth		Weight
31.79 in	18.88 in			38.78 in		210 Ibs
808 mm	480 mm			985 mm		95 kg

TEMPERATURE RANGES

OPERATING TEMPERATURE RANGE

-4°F to 104°F(-20°C to +40°C)

STORAGE TEMPERATURE RANGE

-40°F to 185°F(-40°C to +40°C)

POWER MIG 215