INSTALLATION |
PRESSURE ARM ADJUSTMENT
WARNING
ELECTRIC SHOCK can kill.
•Turn the input power OFF at the weld- ing power source before installation or changing drive rolls and/or guides.
•Do not touch electrically live parts.
•When inching with the gun trigger, electrode and drive mechanism are "hot" to work and ground and could remain energized several sec- onds after the gun trigger is released.
•Do not operate with covers, panels or guards removed or open.
•Only qualified personnel should perform mainte- nance work.
The pressure arm controls the amount of force the drive rolls exert on the wire. Proper adjustment of the pressure arm gives the best welding performance.
Set the pressure arm as follows: |
|
(See Figure A.3) |
|
Aluminum wires | between 1 and 3 |
Cored wires | between 3 and 4 |
Steel, Stainless wires | between 4 and 6 |
FIGURE A.3
CONDUIT INSTALLATION
The
To install conduit to the wire drive:
1.Slide the conduit bushing into the feed plate and secure with the set screw.
2.Slide the conduit into the bushing and lock in place with the thumb screw.
SET
SCREW
THUMB
SCREW
CONDUIT
BUSHING
CONDUIT
LOADING WIRE
WARNING
•Keep hands, hair, clothing and tools away from rotating equipment.
• Do not wear gloves when threading wire or changing wire spool.
• Only qualified personnel should install, use or service this equipment.
AutoDrive™ 4R220
