A-4 INSTALLATIONA-4
WIRE DRIVE CABLE, K1785-XX
Wire drive cables are used to connect power sources and control boxes to remote wire drives.
The cables have a 14 pin connector at each end.
Both ends of the cable have a collar and the cables cannot be “daisy chained” to make a longer cable.
POWER SOURCE
J
A
I
K 
B
H
N
L 
C
G
M 
D
F
E
WIRE FEEDER
| A | J |
B | K | I |
C | L | N H |
D | M | G |
|
| |
| E | F |
| POWER SOURCE |
|
|
Pin | Function |
|
|
A | Motor Power |
B | Motor Power |
C | Gas Solenoid |
D | Gas Solenoid |
E | Reserved |
F | Reserved |
G | “2A” Differential Tachometer |
H | “2B” Differential Tachometer |
I | Reserved |
J | Reserved |
K | “1A” Differential Tachometer |
L | “1B” Differential Tachometer |
M | Reserved |
N | “67” Electrode Sense Lead |
|
|
| WIRE FEEDER |
|
|
Pin | Function |
|
|
A | Motor Power |
B | Motor Power |
C | Gas Solenoid |
D | Gas Solenoid |
E | “2A” Differential Tachometer |
F | Reserved |
G | +15VDC Tech Supply |
H | Tachometer Common |
I | Reserved |
J | Reserved |
K | “1A” Differential Tachometer |
L | “1B” Differential Tachometer |
M | “2B” Differential Tachometer |
N | “67” Electrode Sense Lead |
AutoDrive™ 4R220
