Lincoln Electric 575 manual Installation

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS - Vantage 575 (K2170-1)

INPUT - DIESEL ENGINE

Make /Model	Description	Speed (RPM)	Displacement	Starting	Capacities
				System
Cummins	4 cylinder	High Idle 1590	3.3L	12VDC battery	Fuel 94.6L
B3.3	36kw (48 HP)	Low Idle 1300	(199 cu in)	& Starter	(25 US gal)
Diesel Engine	@ 1500 RPM	Full Load 1500
			Bore x Stroke		Oil: 7.5L
					(2 US gal)
			95mm x 115mm
			(3.74” x 4.53”)		Coolant: 11.8L
					(2.6 US gal)

RATED OUTPUT @ 40°C(104°F) - WELDER

Duty Cycle	Welding Output	Volts at Rated Amps
100%	450 Amps (DC multi-purpose)	38 Volts
60%	500 Amps (DC multi-purpose)	40 volts

OUTPUT @ 40°C(104°F) - WELDER AND GENERATOR

Welding Range

30 - 500 Amps CC/CV

20 - 250 Amps TIG

Open Circuit Voltage

60 Max OCV @ 1590 RPM

	Auxiliary Power (1)	(50 HZ)
Outlets x Phase	Voltage	Power	Amps
1 x 3ph	380 Volt	12kVA	18.5 Amps
3 x 1ph	220 Volt	10kVA	15 Amps

PHYSICAL DIMENSIONS

Height (2)	Width	Depth	Weight
1067mm	800mm	1603mm	737kg
(42.0 in)	(31.5in)	(63.1in)	(1625lbs)
			(Approx)

(CTE) Centre Tapped Earth

1.Output rating in watts is equivalent to volt-amperes at unity power factor.

Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

2.Top of Enclosure. Add 223.5mm (8.8”) for exhaust.

Vantage 575