OPERATION | ||
|
|
|
CUTTING CAPABILITY
The TOMAHAWK™ 625 is rated at 40 amps, at 35% duty cycle on a 10 minute basis. If the duty cycle is exceeded, a thermal protector will shut off the output of the machine until it cools to the normal operating temperature.
Figure B.1 shows the cut capacity of the TOMA- HAWK™ 625 when cutting mild steel. (The graph plots cut thickness vs. torch travel speed with a torch standoff of 0.15".)
CONSUMABLE LIFE
The expected life for the TOMAHAWK™ 625's elec- trode under normal operating conditions is approxi- mately 1000 starts/cuts. An erosion of .060" is typical for end of electrode life, however, the electrode life may last longer. A green and erratic arc will indicate definite electrode failure and the electrode should be replaced immediately.
It is recommended that consumables be replaced in complete sets. (Example: Electrode and Nozzle). This will maximize the performance of the TOMAHAWK™ 625 system.
Figure B.1
Tomahawk 625 - Cut Capacity Chart
RECOMMENDED TORCH |
| 90 |
|
|
|
|
|
TRAVEL SPEED (IPM) | 80 |
|
|
|
|
| |
70 |
|
|
|
|
| ||
60 |
|
|
|
|
| ||
50 |
|
|
|
|
| ||
40 |
|
|
|
|
| ||
30 |
|
|
|
|
| ||
20 |
|
|
|
|
| ||
10 |
|
|
|
|
| ||
0 |
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
| 0.125 | 0.25 | 0.375 | 0.5 | 0.625 | 0.75 |
Metal Thickness (inches)
TOMAHAWK 625
TOMAHAWK™ 625
