Lincoln Electric IM438-B manual Installation, Mig, Tig

A-1		INSTALLATION		A-1
TECHNICAL SPECIFICATIONS – MAGNUM COOLERS 10-I AND 20-I
			Model
		Cooler 10-I		Cooler 20-I
Product No.		K873-1		K879-1
Input		220V	50/60 Hz 1 Phase	220V 50/60 Hz 1 Phase
Current Draw at Input		.75 Amps		1.25 Amps
Rated Current Draw		1.0 Amps		1.6 Amps
Operating Pressure		45 psi (310 kPa) (3.0 bar)		60 psi (410 kPa) (4.0 bar)
Shutdown Pressure			60-65 psi (414-446 kPa)
(No delay after flow is			(4.0-4.4 bar)
stopped)
Flow Range		0.1 to 0.8 gal/min (0.4 to 3.0 liters/min)
Typical	MIG	with Magnum 15’ (4.5m) gun 0.55-0.60 gal/min (2.1-2.3 liters/min)
Operating
Flow	TIG	with Magnum 12.5’ (3.8m) torch 0.25-0.30 gal/min (1.0-1.2 liters/min)
	Open Flow		0.8 (3.0 liters/min)
Reservoir Size			2.0 ga. (8.0 liters)
Coolant Requirement		For Use Above Freezing: Tap, distilled, de-ionized, mineral water or well water.
		For Use Below Freezing: 50% water and 50% automotive antifreeze mixture
		such as Prestone, Peak or Zerex or 50% water and 50% pure ethylene glycol
		mixture or any water alcohol mixture.
		DO NOT USE: Prepackaged welding industry coolants. These coolants may
		contain oil-based substances which attack the plastic components in the pump
		of the Magnum Cooler and severely reduce pump life.
Weight		Shipping	30 lbs. (13.6 kg)	34 lbs. (15.4 kg)
	Reservoir	43 lbs. (19.5 kg)		47 lbs. (21.3 kg)
	Full
Dimensions	L	9.0 in. (229mm)		9.0 in. (229mm)
	W	9.0 in. (229mm)		9.0 in. (229mm)
	H Top Face	26.5 in. (673mm)		32.00 in. (815mm)
	H Top	28.75 in. (730mm)		34.25 in. (870mm)
	Handle
Undercarriage Use		K874		K840-1*, K841-1*, K842-1*,
				K874

* Not available at the time of printing.

MAGNUM COOLER 10-I & 20-I

MAR97