Lincoln Electric IM610-A manual Safety Precautions, Identify and Locate Components, Installation

A-2	INSTALLATION	A-2
Read entire installation section before starting		FIGURE A.1
installation.
SAFETY PRECAUTIONS	1	2

WARNING

ELECTRIC SHOCK can kill.

•Only qualified personnel should perform this installation.

W
ELDING			AMP
25-1				RANGE
		25
SP-
175	Plus

•Only personnel that have read and under- stood the SP-175 Plus Operating Manual should install and operate this equipment.

•Machine must be plugged into a receptacle which is grounded per any national, local or other applicable electrical codes.

• The SP-175 Plus power switch is to be in the OFF (“O”) position when installing work cable and gun and when connecting power cord to input power.

IDENTIFY AND LOCATE

COMPONENTS

4

3

6

5

If you have not already done so, unpack the SP-175 Plus from its carton and remove all packing material around the SP-175 Plus . Remove the following loose

items from the carton (see Figure A.1): 7

1. SP-175 Plus

2.Gun and cable assembly(1)

3.Literature and miscellaneous including:

a)This operating manual

b)A contact tip for .030” (0.8 mm) diameter wire.

c)A contact tip for .035” (0.9 mm) diameter wire.

4.10 ft (3.0 m) work cable.

5.Work clamp.

6.Sample Spool of L-56 .025 MIG Wire.

7.Adjustable mixed-Gas Regulator & Hose.

For available options and accessories refer to the accessories section later in this manual.

1)As shipped from the factory, the SP-175 Plus gun liner is ready to feed .023” (0.6 mm) -.035 (0.9 mm)

wire. The contact tip is sized for .025” (0.6 mm) wire SP-175 PLUS feeding.