INSTALLATION | ||
|
|
|
MOUNTING THE TORCH
Always insulate the torch from any equipment or fixturing. Use M19190 Bracket Arm to Torch Body Insulator if necessary. (See Figure 4, Torch mounting dimensions)
Check to make sure the cables are free to flex and do not get tangled or caught on other equipment. Do not let the cables drag on moving or hot parts.
Use a collision sensor if there is a risk that the torch may impact an object when the torch or work piece moves.
The case of the torch has holes drilled on the back, left and right sides for mounting the insulator on either the back or side of the torch. All of the holes are drilled and tapped for
FIGURE 4
Torch Mounting Dimensions
M19190
TANDEM MIG TORCH
