OPERATION | ||
|
|
|
SAFETY PRECAUTIONS
WARNING
Do not attempt to use this equipment until you have thoroughly read the engine manufacturer’s manual supplied with your welder. It includes important safety precautions, detailed engine starting, operating and maintenance instructions, and parts lists.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts or electrode with skin or wet clothing.
•Insulate yourself from work and ground
•Always wear dry insulating gloves.
•Always operate the welder with the hinged door closed and the side panels in place.
•Read carefully the Safety Precautions page before operating this machine. Always follow these and any other safety procedures included in this manual and in the Engine Instruction Manual.
GENERAL DESCRIPTION
The RANGER 305G is a gasoline engine powered DC
DESIGN FEATURES
FOR AUXILIARY POWER:
Start the engine and set the IDLER control switch to the desired operating mode. Full power is available regardless of the welding control settings providing no welding current is being drawn.
The auxiliary power of the RANGER 305G consists of two 20
ENGINE OPERATION
Before Starting the Engine:
•Be sure the machine is on a level surface.
•Open top engine door and remove the engine oil dipstick and wipe it with a clean cloth. Reinsert the dipstick and check the level on the dipstick.
•Add oil (if necessary) to bring the level up to the full mark. Do not overfill. Close engine door.
•See Engine Owner’s Manual for specific oil recom- mendations.
ADD FUEL
WARNING
GASOLINE can cause fire or explosion.
•Stop engine when fueling.
•Do not smoke when fueling.
•Do not overfill tank.
•Avoid contact with skin or breathing of vapor.
•Keep sparks and flame away from tank.
•Remove the fuel tank cap.
•Fill the tank approximately 4 inches (100mm) from the top of the filler neck to allow for fuel expansion (observe the fuel gauge while filling). DO NOT FILL THE TANK TO THE POINT OF OVERFLOW.
•Replace the fuel cap and tighten securely.
•See Engine Owner’s Manual for specific fuel recom- mendations.