Lincoln Electric IM823-A manual Figure A.1

A-4	INSTALLATION	A-4
	CONNECTION DIAGRAM, ACROSS THE ARC MODEL Set-Up ( See Figure A.1)

Typically used for general fabrication, maintenance and repair jobs because it’s easy to set up and operate.

Requires only one cable-less to carry. Contactor standard on Across The Arc Model.

FIGURE A.1

RANGER 8

SAE 400 WITH CV ADAPTER

ENGINE DRIVEN WELDERS WITH WIRE FEED MODULE (LOCAL MODE AND CV ADAPTER)

Output Terminals Always Hot.

Electrode Cable

semiautomatic

Work

Clamp

	Output Terminals
CV250
	Always Hot.
CV300
CV400	Order K484 Jumper
	Plug Kit.
	Electrode Cable

semiautomatic

wire feeder K1870-1

Work

Clamp

CV655, DC400, DC600,

DC655, V350-PRO,

RANGER 9, RANGER 300 DLX COMMANDER 300 COMMANDER 500 RANGER 250

RANGER 305G

Output Terminals

Always Hot.

Power source contactor switch must be in the "ON" position or use a K848 Junper Plug Kit.

semiautomatic wire feeder

K1870-1

Electrode Cable

Output Terminals

Always Hot.

CC POWER SOURCE

Electrode Cable

Work

Clamp

semiautomatic wire feeder

K1870-1

Work

Clamp

Although a constant voltage (CV) power source is recommended for best results with Innershield® and gas metal arc (GMAW) open arc welding, satisfactory general purpose welding may be obtained using the LN™-15 with a constant current (CC) power source for non-critical commercial quality mild steel welding applications.

LN™-15 ACROSS THE ARC MODEL & (CE)