Gigabyte GA-EP45-UD3P SMART LAN1/LAN2 LAN Cable Diagnostic Function, When a Cable Problem Occurs

Models: GA-EP45-UD3P

1 128
Download 128 pages 61.63 Kb
Page 54
Image 54
SMART LAN1/LAN2 (LAN Cable Diagnostic Function)

SMART LAN1/LAN2 (LAN Cable Diagnostic Function)

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

SMART LAN

Start detecting at Port

 

 

 

 

 

 

Item Help

Part1-2 Status

=

Open

/

Length

=

0m

 

Menu Level``

Part3-6 Status

=

Open

/

Length

=

0m

 

 

 

Part4-5 Status

=

Open

/

Length

=

0m

 

 

 

Part7-8 Status

=

Open

/

Length

=

0m

 

 

 

KLJI: Move

Enter: Select

 

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

 

F6: Fail-Safe Defaults

 

F7: Optimized Defaults

This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable. This feature will detect cabling issue and report the approximate distance to the fault or short. Refer to the following information for diagnosing your LAN cable:

 When No LAN Cable Is Attached... When No LAN Cable Is Attached...

If no LAN cable is attached to the motherboard, the Status fields of all four pairs of wires will show Open and the Length fields show 0m, as shown in the figure above.

 When LAN Cable Is Functioning Normally... When LAN Cable Is Functioning Normally...

If no cable problem is detected on the LAN cable connected to a Gigabit hub or a 10/100 Mbps hub, the following message will appear:

Start detecting at Port.....

Link Detected --> 100Mbps

Cable Length= 30m

Link Detected

Displays transmission speed

Cable Length

Displays the approximate length of the attached LAN cable.

Note: The Gigabit hub will only operate at a speed of 10/100 Mbps in MS-DOS mode; it will operate at a normal speed of 10/100/1000 Mbps in Windows mode or when the LAN Boot ROM is activated.

 When a Cable Problem Occurs... When a Cable Problem Occurs...

If a cable problem occurs on a specified pair of wires, the Status field will show Short and then length shown will be the approximate distance to the fault or short.

Example: Part1-2 Status = Short / Length = 2m

Explanation: A fault or short might occur at about 2m on Part 1-2.

Note: Part 4-5 and Part 7-8 are not used in a 10/100 Mbps environment, so their Status fields will show Open, and the length shown is the approximate length of the attached LAN cable.

GA-EP45-UD3P Motherboard

- 54 -

Page 54
Image 54
Gigabyte GA-EP45-UD3P user manual SMART LAN1/LAN2 LAN Cable Diagnostic Function, When No LAN Cable Is Attached