Gigabyte GA-EP45-UD3P Delay For HDD Secs, Full Screen LOGO Show, Dual BIOS Recovery Source

Delay For HDD (Secs)

Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The adjustable range is from 0 to 15 seconds. (Default: 0)

Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays normal POST message. (Default: Enabled)

Dual BIOS Recovery Source

If the main BIOS is corrupted, selects whether to recover the BIOS from the backup BIOS or from the HPA in the hard drive. (Default: HPA)

Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express graphics card.

PCI	Sets the PCI graphics card as the first display. (Default)
PEG	Sets PCI Express graphics card on the PCI Express x16 slot (PCIEX16_1) as the
	first display.
PEG2	Sets PCI Express graphics card on the PCI Express x8 slot (PCIEX8_1) as the first
	display.

- 51 - BIOS Setup