Gigabyte GA-EP45-UD3P user manual Warning All Data On Selected Disks Will Be Lost

Step 5:

Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begin creating the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm or <N> to cancel (Figure 6).

Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5

Copyright(C) 2003-08 Intel Corporation. All Rights Reversed.

[ CREATE VOLUME MENU ]

Name : RAID_Volume0

RAID Level : RAID0(Stripe)

Disks : Select Disks

Strip Size : 128KB

Capacity : 223.6 GB

Create Volume

WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.

[ HELP ]

Are you sure you want to create this volume? (Y/N) :

Press ENTER to create the specified volume.

[KL]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

Figure 6

When completed, you can see detailed information about the RAID array in the DISK/VOLUME INFORMATION section, including the RAID level, stripe block size, array name, and array capacity, etc. (Figure 7)

Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5

Copyright(C) 2003-08 Intel Corporation. All Rights Reversed.

		[ MAIN MENU ]
	1. Create RAID Volume			3. Reset Disks to Non-RAID
	2. Delete RAID Volume			4. Exit
		[ DISK/VOLUME INFORMATION ]
RAID Volumes :
ID	Name	Level	Strip	Size	Status	Bootable
0	Volume0	RAID0(Stripe)	128KB	223.6GB	Normal	Yes
Physical Disks :
Port	Drive Model	Serial #		Size	Type/Status(Vol ID)
0	ST3120026AS	3JT354CP		111.8GB	Member Disk(0)
1	ST3120026AS	3JT329JX		111.8GB	Member Disk(0)
	[KL]-Select	[ESC]-Exit			[ENTER]-Select Menu

Figure 7

To exit the ICH10R RAID BIOS utility, press <Esc> or select Exit in MAIN MENU.

Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA RAID/ACHI driver and operating system.

- 91 - Appendix