Gigabyte GA-EP45-UD3P Onboard LAN1/LAN2 Boot ROM, Onboard SATA/IDE Device GIGABYTE SATA2 Chip

Onboard LAN1/LAN2 Boot ROM

Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled)

Onboard SATA/IDE Device (GIGABYTE SATA2 Chip)

Enables or disables the IDE and SATA controllers integrated in the GIGABYTE SATA 2 chip. (Default: Enabled)

Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip)

Enables or disables RAID for the SATA controller integrated in the GIGABYTE SATA 2 chip or configures the SATA controller to AHCI mode.

IDE	Disables RAID for the SATA controller and configures the SATA controller to
	PATA mode. (Default)
AHCI	Configures the SATA controller to AHCI mode. Advanced Host Controller
	Interface (AHCI) is an interface specification that allows the storage driver to
	enable advanced Serial ATA features such as Native Command Queuing and
	hot plug.
RAID/IDE	Enables RAID for the SATA controller. (The IDE controller still operates in PATA
	mode)

Onboard Serial Port 1

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.

Onboard Parallel Port

Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and corresponding interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.

- 55 - BIOS Setup