Gigabyte GA-EP45-UD3P Standard CMOS Features, Date, Time, IDE Channel 0, 1 Master/Slave

2-4 Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

Standard CMOS Features

Date (mm:dd:yy)	Mon, Aug 25 2008
Time (hh:mm:ss)	22:31:24
` IDE Channel 0 Master	[None]
` IDE Channel 0 Slave	[None]
` IDE Channel 1 Master	[None]
` IDE Channel 1 Slave	[None]
` IDE Channel 2 Master	[None]
` IDE Channel 3 Master	[None]
` IDE Channel 4 Master	[None]
` IDE Channel 4 Slave	[None]
` IDE Channel 5 Master	[None]
` IDE Channel 5 Slave	[None]
Drive A	[1.44M, 3.5"]
Floppy 3 Mode Support	[Disabled]
Halt On	[All, But Keyboard]

Item Help

Menu Level`

KLJI: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

Standard CMOS Features

Base Memory	640K
Extended Memory	510M
Total Memory	512M

Item Help

Menu Level`

KLJI: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Date

Sets the system date. The date format is week (read-only), month, date and year . Select the desired field and use the up arrow or down arrow key to set the date.

Time

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.

IDE Channel 0, 1 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel. IDE Channel 0, 1 Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:
- 47 -	BIOS Setup