Gigabyte GA-EP45-UD3P user manual Step

Step 4:

Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the new BIOS version is present on the POST screen.

Step 5:

During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press <Enter> to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we recommend that you reload BIOS defaults.

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

`	MB Intelligent Tweaker(M.I.T.)	Load Fail-Safe Defaults
`	Standard CMOS Features	Load Optimized Defaults
`	Advanced BIOS Features	Set Supervisor Password
`	Integrated Peripherals	Set User Password
`	Power Management Setup	Load Optimized DefaultsSave(Y/N)?& ExitY Setup
`	PnP/PCI Configurations	Exit Without Saving
`	PC Health Status	` Security Chip Configuration

ESC: Quit	KLJI: Select Item	F11: Save CMOS to BIOS
F8: Q-Flash	F10: Save & Exit Setup	F12: Load CMOS from BIOS
	Load Optimized Defaults

Press <Y> to load BIOS defaults

Step 6:

Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts.

GA-EP45-UD3P Motherboard - 76 -