Gigabyte GA-EP45-UD3P user manual Create RAID Disk Drive, RAID LevelMembers HDD 01Capacity

When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 8).

GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78

[ Main Menu ]

Create RAID Disk Drive

Delete RAID Disk Drive

Revert HDD to Non-RAID

Solve Mirror Conflict

Rebuild Mirror Drive

Save And Exit Setup

Exit Without Saving

[ Hard Disk Drive List ]
Model Name	Capacity	Type/Status
HDD0: ST3120026AS	120 GB	RAID Inside
HDD1: ST3120026AS	120 GB	RAID Inside

[ RAID Disk Drive List ]
Model Name	RAID Level	Capacity	Status	Members(HDDx)
RDD0: GRAID	0-Stripe	240 GB	Normal	01

[IJTAB]-Switch Window [KL]-Select ITEM [ENTER]-Action [ESC]-Exit

Figure 8

To check more detailed information about the array, use the <Tab> key while in the Main Menu block to move the selection bar to the RAID Disk Drive List block. Select the array and press <Enter>. A small window displaying the array information will appear in the center of the screen (Figure 9).

GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78

[ Main Menu ]	[ Hard Disk Drive List ]
Create RAID Disk Drive	Model Name
Delete RAID Disk Drive	HDD0: ST3120026AS
Revert HDD to Non-RAID	HDD1: ST3120026AS
Solve Mirror Conflict	[ RAID Information ]
Rebuild Mirror Drive
	Name: GRAID
Save And Exit Setup
Exit Without Saving	Level: 0-Stripe
	Block: 128KB
[ RAID Disk Drive List ]	Capacity: 240GB
Model Name	RAID LevelMembers: HDD 01Capacity
RDD0: GRAID	0-Stripe Status: Normal 240 GB

Capacity	Type/Status
120 GB	RAID Inside
120 GB	RAID Inside

Status Members(HDDx)

Normal 01

[IJTAB]-Switch Window [KL]-Select RAID [ENTER]-Detail [ESC]-Exit

Figure 9

- 97 - Appendix