Gigabyte GA-EP45-UD3P SATA Port0-3 Native Mode, USB Controller, USB 2.0 Controller, Azalia Codec

SATA Port0-3 Native Mode

Specifies the operating mode of the integrated SATA controllers.

Disabled	Allows the SATA controllers to operate in Legacy IDE mode.
	In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
	with other device. Set this option to Disabled if you wish to install operating
	systems that do not support Native mode. (Default)
Enabled	Allows the SATA controllers to operate in Native IDE mode.
	Enable Native IDE mode if you wish to install operating systems that support
	Native mode.

USB Controller

Enables or disables the integrated USB controller. (Default: Enabled)

Disabled will turn off all of the USB functionalities below.

USB 2.0 Controller

Enables or disables the integrated USB 2.0 controller. (Default: Enabled)

USB Keyboard Support

Allows USB keyboard to be used in MS-DOS. (Default: Enabled)

USB Mouse Support

Allows USB mouse to be used in MS-DOS. (Default: Disabled)

Legacy USB storage detect

Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during the POST. (Default: Enabled)

Azalia Codec

Enables or disables the onboard audio function. (Default: Auto)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled.

Onboard H/W 1394

Enables or disables the onboard 1394 function. (Default: Enabled)

Onboard H/W LAN1/LAN2

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled.

Green LAN

When the onboard LAN function and Green LAN are enabed, the system will dynamically detects if LAN cable(s) is connected or not. If not, the corresponding LAN controller will be disabled automatically. (Default: Disabled)

- 53 - BIOS Setup