WIRE FEED OPTIONS
Wire Feed Module (K623-1) - Provides constant
voltage (CV) output with improved arc stability for Innershield welding. Excellent for MIG welding. Recommended wire feeders are the LN-7, LN-23P and LN-25. (Factory installed on the K1643-6).
LN-25 Wire Feeder (K449)-Portable CC/CV unit for flux-cored and MIG welding. Includes Gas Solenoid & Internal Contactor. Requires Wire Feed Module.
Remote Voltage Control Kit for LN-25 (K444-2)Provides 25 ft. (7.5m) of remote output voltage control and output jumper (2 and 4) for machines having 14 pin MS-type connector.
Magnum® 350 Innershield Gun (for LN-25)(K126-2)- For self-shielded wire with 15 ft. (4.5m) cable. For
.062-3/32” (1.6-2.8mm) wire.
Magnum® 300 MIG Gun for LN-25 K1802-1 - With 15 ft. (4.5m) cable. For .035”-.045”(0.9-1.2mm) gas shielded (Includes Connector Kit).
LN-23P Wire Feeder (K316L-1)-Portable CV unit for Innershield pipe welding. Control cable operates con- tactor inside Wire Feed Module for “cold” electrode.
Requires LN-23P Adapter Kit (K350-1) and Gun and Cable Assembly.
LN-23P Adapter Kit (K350-1)-Required to adapt LN- 23P to any Lincoln power source. Makes 14 pin con- nection at power source.
Magnum® 250 Innershield Gun (for LN-23P) (K355-10)-For lighter weight and easier handling. Rated 250 amps, 60% duty cycle. For .068 through 5/64” (1.7 through 2.0 mm) Innershield wire and includes reduced speed switch. For pipewelding, an M11476 62° gun tube is recommended.
62° gun tube for PipeWelding (KP1909-1)- Recommended modification for K355-X or K345-X guns with 90° gun tubes. Compatible with K126-1,-2K264-8 and K355-10.
Magnum Spool Gun (K487-25)-Hand held semiauto-
matic wire feeder requires SG Control Module. 25 ft. (7.6m)length.
SG Control Module (K488) (For Magnum Spool
Gun) -The interface between the power source and the spool gun. Provides control of wire speed and gas flow.
Input Cable (K691-10) ( For SG Control Module) - For Lincoln engine drives with 14-pinMS-type con- nection provides separate 115V NEMA receptacle and output stud connections. 10 ft. (3.1m)length.
