Lincoln Electric IM846-A Single Head Feeder, SINGLE HEAD bOOM FEEDER, Dual Head Feeder, PF-10R

A-5 INSTALLATION A-5

CONFIGURING THE SYSTEM

The power source will “Auto Map” the system eliminat- ing most of the need to set DIP switches to configure the system.

If a system can not be “Auto Mapped” then the status light on the power source will blink green fast and the welder output will be disabled.

If a system can not be “Auto Mapped” then the status light on the power source will blink green fast and the welder output will be disabled. If a system is not “Auto-mappable”, then consult the instruction manual for the accessory being used for configuration infor- mation about DIP switch settings, or consult your local Lincoln sales representative.

SINGLE HEAD FEEDER DUAL HEAD FEEDER

UP TO 4 WIRE FEEDERS

ALLOWED

POWER WAVE	POWER WAVE
405M	405M

CONTROL bOX

FEED HEAD

SINGLE HEAD bOOM FEEDER

UP TO 4 FEED HEADS

ALLOWED

POWER WAVE

405M

FEED HEAD 1

SINGLE HEAD bOOM FEEDER

	POWER WAVE 405M
RObOT
PLC CONTROLLER		WIRE
ANALOG INTERFACE		DRIVE
		MODULE

PF-10R

etc.

POWER WAVE 405M