English Manual | 11 |
wF5 ADM:
Only available for the administrator!
F5 opens a sub menu showing options for the configuration of the CPU Switch MultiMedia. Please note that changes will affect all users that are logged in as administrator at the same time.
The following sub menus will be listed:
Setting
SET PASSWORD
SET ACCESSIBLE PORTS
SET ACCESS
TIMEOUT
CLEAR THE NAME LIST
RESTORE DEFAULT VALUES
RELEASE ALL PRIVAT
SET LOGOUT
TIMEOUT
SET MULTIUSER MODE
Function
This function is used to set passwords for the Administrator and User: One Administrator and four User passwords can be set. Move the highlight bar to User or Administrator, then press [Enter]. A screen that allows you to key in your password appears. The password maybe up to 8 characters long and can consist of any combination of letters and numbers (A - Z, 0 - 9). You are asked to key the password in twice to make sure there is no typing mistake.
To modify or delete a previous password, use the backspace key. If the Administrator wants to change a user’s password, he must enter their administrator’s password first.
This function allows Administrators and Users to select, which Ports can be accessed, from a particular Console.
If access is ON, a plus mark ( + ) has to be selected, space ( ) means that access is not possible. Selection is made by ENTER or SPACEBAR.
A
This function is used to undo all Administrator changes and return to the original factory default settings.
Note: While this function is in progress, make sure that no other operations are performed on any of the other Consoles.
This function is used to undo all Administrator changes and return to the original factory default settings - except for the Names that were assigned to Ports
Releases all Ports that have been set to Private Mode (see Private Mode), so that they become accessible to all Consoles.
If a Console that has accessed by a computer is not used for the amount of time set with this function, the Operator is automatically logged out. A log in is necessary before the Console can be used again. This enables the other Consoles to gain access to the computers when the original Console is no longer accessing them, but the Operator has forgotten to relinquish access. To set the timeout value, key in a number from
This function determines whether the same ID can be used to log into the CPU Switch MultiMedia from different Consoles at the same time.
1.If Disabled, the same ID cannot be used; if Enabled (the default), the same ID can be used to log in from more than one Console.
2.If Enabled, the F4, F6, and F7 settings set for any one Console, will be the same for all other Consoles that log in with the same ID.
3.Changes made to the F4, F6, and F7 settings by any logged in Console will automatically affect all Consoles with the same ID.
© LINDY ELECTRONICS LIMITED &
