Lindy 2X8 manual Factory Default Setting, Troubleshooting, Keyboard and mouse not responding

English Manual 13

w

F7 QV

You can broaden or narrow the number of ports that get automatically scanned by selecting only the ones you want with the QV (Quick View Scan) function. [F7] is a toggle that selects or deselects the currently highlighted port for the Quick View Scanning function (see F4, above). To select/deselect a port for Quick View Scanning Double Click the port you want, or use the Navigation Keys to move the highlight bar to it. Then press [F7].

When a port has been selected for Quick View Scanning, an arrowhead displays in the QV column to indicate so. When a port is deselected, the arrowhead disappears.

F8 OUT

Clicking the F8 field, or pressing [F8] logs you out of OSD control of the CPU Switch MultiMedia and blanks the Console screen. This is different from simply pressing [Esc] to deactivate the OSD, since with this function you must log in all over again to regain access to the OSD.

Note:

1.When you re-enter the OSD after logging out, the screen stays blank except for the OSD Main Menu. You must input your password before you can continue.

2.If you re-enter the OSD after logging out, and immediately use [Esc] to deactivate the OSD without having selected a port from the OSD menu, a Null Port message displays on the screen, and the system reverts to Logout status.

Factory Default Setting

The factory default settings are as following and will be restored by

RESTORE DEFAULT VALUES / CLEAR THE NAME LIST:

Setting

MULTIUSER MODE

ACCESS TIMEOUT

OSD HOTKEY

DISPLAY MODE

DISPLAY DURATION

SCAN DURATION

DEFAULT

ENABLED

10seconds

[CTRL] [CTRL]

Port Number + Name

3seconds

3seconds

Troubleshooting

Keyboard and mouse not responding:

Try to switch to another port and switch back to get back access to the port.

Check if the appropriate ONLINE LED on the front panel of the switch is lighted on.

If NOT, please check if the computer is properly booted up, if it has hung up and if the system connection cables are still attached correctly. Please make sure mouse and keyboard cables are not mixed. Try to connect the computer to another port of the switch with different system cables. If the problem disappears try to connect the system to the old port with the new cable. If the problem does not disappear but other computers work OK it is very likely to check the computer itself.

In case you find some ports of the switch not operating please contact the LINDY support hotline.

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (DEC 2001)