Lindy 52020, 52022 manual Access Point Manager Configuration Utility

English Short Manual

3.1. Access Point Manager Configuration Utility

The Windows based configuration program; Access Point Manager provides easy monitoring, checking and changing of the Access Point parameters.

Place the enclosed CD or Floppy disk into the computer you want to use to connect to the AP. Start the set-up program setup.exe from the enclosed CD or diskette and follow the instructions given there. When finished start the program Access Point Manager. It will automatically search and detect all LINDY Access Points in your network

Double click to any Access Point Symbol to view or change the settings of the AP selected. The Default Password as supplied is “default”

After having entered the correct password the program will display the MAC address, the frequency domain (dependent on the regulations of the countries where used), the firmware version, connection statistics, the upgrade utility page, security, access and encryption settings, etc.

(For further details on Statistics please refer to the extensive English reference manual)

If you want to set up a wireless LAN with more then 1 Access Point and you are not familiar with the basic knowledge for this kind of WLAN, please contact your local dealer or the LINDY support department.

At the moment we are trying to include some additional information under the category TIPS

&MORE on our LINDY homepage www.lindy.com.