 




62
Click to send
the code
Enter the
code here
Keyboard Control
This option displays a keyboard control dialog and is useful for sending keyboard
combinations (to the host) that are needed regularly or that are trapped by the
MC5-IP.
When entering codes:
+ means press down the key that follows
– means release the key that follows
+– means press down and release the key that follows
* means wait 250ms (note: if a number immediately follows the asterisk, then
the delay will equal the number, in milliseconds)
It is automatically assumed that all keys specied will be released at the end, so
there is need to specify -Ctrl or -Alt if these keys are to be released together.
See Appendix 8 for a list of key sequence codes that can be used.
Examples:
‘Ctrl + Alt 12’ would be expressed as: +Ctrl+ Alt+1–1+2
+N means press the ‘N’ key
+Scroll means press the Scroll lock key
+Space means press the space key
Video Settings
see next page
Info
When selected, this option displays an information dialog showing the current
logged on users, the current host, its video mode and its mouse motion details.
KVM switch menu
This option displays the MC5 main menu and provides access to the same
options presented to local and remote users. The only option that cannot be
accessed is Congure IP port. For details of the other options available, please
refer to Appendix 1 - Conguration menus.