Lindy MC5-IP manual Network Configuration

Network Configuration

This page allows you to configure the	LINDY MC5
various aspects of the IP port and its	Network Config
relationship with the local network.	Mac Addr	00:0F:58:40:07:FE
	Use DHCP	No
Mac Addr	IP Address	192.168.42.25
Media Access Control address – this	Net Mask	255.255.255.0
is the unique and unchangeable code	Gateway	192.168.0.1
	VNC Port	5900
that was hard coded within your MC5-
	HTTP Port	80
IP unit when it was built. It consists
	Clear IP Access Control
of six 2-digit hexadecimal (base 16)
numbers separated by colons. A	Enter-Select	Esc-Exit
section of the MAC address identifies
the manufacturer, while the remainder	-Up -Down	Space-Toggle

is effectively the unique electronic serial number of your particular unit.

Use DHCP

DHCP is an acronym for ‘Dynamic Host Configuration Protocol’. Its function is particularly useful when connecting to medium size or larger networks, such as the Internet. When this option is selected, your MC5-IP will attempt to locate a DHCP server on the network. If such a server is located, it will supply three things to the MC5-IP: an IP address, an IP network mask (also known as a Subnet mask) and a Gateway address. These are not usually granted permanently, but on a ‘lease’ basis for a fixed amount of time or for as long as the MC5-IP remains connected and switched on. Discover allocations.

IP Address

This is the identity of the MC5-IP within a network. The IP address can be thought of as the telephone number of the MC5-IP. Unlike the MAC address, the IP address can be altered to suit the network to which it is connected. It can either be entered manually or configured automatically using the DHCP option. When the DHCP option is enabled, this entry is unavailable.

Net Mask

Also often called the ‘subnet-mask’, this value is used alongside the IP address to help define a smaller collection (or subnet) of devices on a network. In this way a distinction is made between locally connected devices and ones that are reachable elsewhere, such as on the wider Internet. This process helps to reduce overall traffic on the network and hence speed up connections in general.

Gateway

This is the address of the device that links the local network (to which the MC5-IP is connected) to another network such as the Internet. Usually this is a network switch or router and it will be used whenever a device to be contacted lies outside the local network.

VNC Port

This is the logical link through which communications with a remote VNC viewer will be channelled (see What is a port?). The default setting is 5900 which is

a widely recognised port number for use by VNC software. However, in certain circumstances it may be advantageous to alter this number - see Security issues with ports for more details.

Note: The VNC port and HTTP port can be set to the same port number in order to simplify router and firewall configuration. If this is done then the MC5-IP will “listen” for both types of traffic on the single port.

HTTP Port

This is the logical link through which communications with a remote web browser will be channelled. The default setting of 80 is an established standard for web (HTTP – HyperText Transfer Protocol) traffic though this can be changed to suit your local network requirements.

Clear IP Access Control

This option removes all entries from the IP access control feature within the MC5-IP. The IP access control feature (configurable by a global admin user) allows certain network address ranges to be denied access to the MC5-IP. If set incorrectly, it is possible to exclude all network users and so this option provides an emergency recovery point.

   



76