Linear installation instructions AE-1000 Operation, Requesting Access with an Entry Code

AE-1000 Operation

Requesting Access with an Entry Code

•Residents have up to 40 seconds to key in their entry code.

•Up to eight seconds are allowed between each keystroke.

•All digits of the entry code must be entered. Example: If the entry code length is set for four digits, and the code is 0042, the user must enter “0 0 4 2”.

•If the wrong key is pressed, pressing thekey will reset the keypad. The correct code can then be entered.

•After a correct code is entered, and if the conditions for granting access are fulfi lled, the programmed relay will activate for the programmed time.

•If the number of incorrect codes entered exceeds the keypad lockout count, the keypad will be locked and not accept any entries for one minute.

•If the Anti-passback feature is enabled, the entry code will be unusable until the anti-passback time expires.

Requesting Access with a Wireless Transmitter

•Activate a wireless transmitter within radio range of the AE-1000’s antenna.

•After a valid transmitter is decoded, and if the conditions for granting access are fulfi lled, the programmed relay channel will activate for the programmed time.

•If the Anti-passback feature is enabled, the transmitter will be unusable until the anti-passback time expires.

Requesting Access with a Visitor Call

•Press to view the directory.

•The visitor scrolls through the alphabetical directory entries

viewing the resident names and associated directory numbers

by pressing & on the keypad. (Holding down the keys will scroll the display faster.)

•If the visitor already knows the resident’s directory number, they can enter the directory number to call the resident.

•The system dials the resident’s telephone number to establish 2-way communications.

✦NOTE: The resident’s telephone number will never be displayed to the visitor.

•If the resident is using the telephone at the same time a visitor calls, the display will indicate to the visitor that the line is busy.

•The resident answers the call and converses with the visitor to determine if access will be granted.

•The resident can use their telephone’s keypad to grant access

activating Relay Channel “A” by pressing , or activating Relay Channel “B” by pressing . After access is granted, the system will disconnect the visitor and resident call.

•The resident can disconnect the visitor without granting access by pressing or by hanging up.

✦NOTE: The telephone keys that the resident presses can be customized for the installation.

•The length of time the visitor is allowed to talk can be programmed from 15-255 seconds. The resident will hear a series of beeps

during the last 10 seconds of talk time. To restart the talk timer, the resident can press on their telephone.

ENTRY CODE AT LOCAL KEYPAD ENTRY CODE AT REMOTE KEYPAD

ACTIVATE TRANSMITTER

ANTENNA

1 PRESS	2 ENTER DIRECTORY NUMBER	VISITOR
TO VIEW DIRECTORY	OR PRESS OR TO
	SCROLL THROUGH THE RESIDENT
	NAMES

TENANT

3AFTER SCROLLING, ENTER THE RESIDENT'S

DIRECTORY NUMBER AND TALK	THE RESIDENT CAN CONTROL
WITH THE RESIDENT	ACCESS USING TELEPHONE KEYS
	RELAY "A"
	RELAY "B"
	DISCONNECT

18